Features:

• 3 ¼" flush frame depth (3 ½" on casements & awnings) with integral interior receiver that accommodates either ½" drywall or ¾" jamb stock.
• Standard Argon filled Low E Glass coating for improved energy efficiency
• Double Strength glass
• Intercept® Warm-Edge thermal spacer system by PPG
• Fully welded frame, with multi chambered vinyl for energy efficiency, strength and stability
• A multitude of renovation accessories
• Meets stringent Energy Star performance requirements
• Custom sizes

Glass Options

• Low-E c/w Argon Gas Standard
• Optional Sol-R Ti c/w Argon Gas
• Optional clear
• Optional; tempered
• Optional frosted, grey or bronze

---

Between the glass grills

---

---

---

Exterior Colors - with white interior

Exterior Trim - all brickmoulds available in all colors

31/2” Casing with fin	2” Two Part Brickmould with cap c/w 1” Sill	1 3/8” with Fin or 1 3/8” without Fin	1 1/16 ”Exterior Extension

Interior Trim

• PVC Capped Pine jamb extension
  • to 8"
  • to 10-11/16"
• Prime Pine jamb extension
  • to 4-5/8"
  • to 8"

 

• Head expander
• Sill expander

 

Performance Data

Canada  CAN/CSA A440-00
	Air @ 75 Pa	Water	Wind
Double hung	A3	B7	C2
Single hung	A3	B7	C2
Tilt slider	A3	B2	C2
Lift out slider	A3	B4	C3
Picture Fix	Fixed level	B7	C4
Casement	A3	B7	C3

 

United States  AAMA/CSA/WDMA 101/I.S.2/A440-05
	Air @ 1,57 PSF	Water	Uniform Load Structural	Design pressure
Double hung	Pass/ A3 level	720 Pa (15 PSF)	52,5 PSF	35,0 PSF
Single hung	Pass/ A3 level	720 Pa (15 PSF)	52,5 PSF	35,0 PSF
Tilt slider	Not tested yet	Not tested yet	Not tested yet	Not tested yet
Lift out slider	Pass/ A3 level	400 Pa (8.25 PSF)	60,0 PSF	40,0 PSF
Picture Fix	Pass/ Fixed level	720 Pa (15PSF)	82,5 PSF	55,0 PSF

 

United States  AAMA/NWWDA 101/I.S. 2-97
	Air @ 1,57 PSF	Water	Uniform Load Structural	Design pressure
Casement	Pass 0.048 cfm/sft	R90  12.0 PSF	R45@67.5 PSF	45,0 PSF